Wet Look Concrete & Block Paving Sealer 20L – Imprinted Driveway Patio Gloss PU

Wet Look Block Paving & Concrete Sealer — 20L (PU / Acrylic) — Professional Grade

Restores colour & delivers a long-lasting wet look gloss for driveways, patios, imprinted concrete & block paving.

Professional wet look finish — PU / acrylic formulation for non-yellowing gloss.

Dual action — Curing membrane for new concrete + deep sealer for existing surfaces.

Durable protection — Resists oil, fuel, alkalis, UV & traffic wear.

Coverage — ~6–8 m² / litre (see example below). Two coats recommended.

Pack size — 20L trade container (approx. 120–160 m² per pack depending on porosity).

Trade Grade — 20L

Two coats recommended • Allow 48 hours before traffic

Why choose this Wet Look Block Paving & Concrete Sealer?

This professional wet look block paving sealer restores the original colour and lustre of imprinted / stamped concrete, block paving and patios. Formulated for both new and existing concrete, it creates a hard-wearing, high gloss finish while penetrating to protect against stains, weathering and UV fade.

Application & Coverage

Application: Roller or professional sprayer (avoid brushes — for even wet look finish).

Coverage: ~6–8 m² per litre (surface dependent). 20L covers approx. 120–160 m² — two coats recommended for best results.

Drying: Touch dry 2–3 hours in dry conditions. Allow 48 hours before driving.

Weather: Apply only in dry conditions (no rain predicted) and temps above 8°C for optimal cure.

Key Benefits

Enhanced appearance: Deepens colour for a long-lasting wet look gloss.

Dual protection: Curing membrane for new concrete + in-depth sealer for hardened surfaces.

Chemical & UV resistance: Contains UV absorber and resists common chemicals and fuels.

Trade trusted: Professional grade used by contractors for commercial and residential projects.

Frequently Asked Questions

Q1: Can I use this on block paving and imprinted concrete?

Yes — it’s specifically formulated for block paving, imprinted and stamped concrete, patios and driveways. It enhances colour and adds a durable wet look finish. Test a small inconspicuous area if unsure about exact colour change.

Q2: Will the sealer darken or change the colour?

Yes — the product enhances and deepens tones to create a wet look gloss. Degree of darkening depends on surface porosity; always test a small patch first. Slight batch variations possible — we recommend purchasing enough product for the whole job.

Q3: How long before I can drive on the surface?

Touch dry in 2–3 hours (dry conditions). For vehicle traffic, allow a minimum of 48 hours. For heavy use, allow longer cure times if conditions are cool or damp.

Surface Preparation & Safety

Ensure surface is clean, dry and free from oil, dust, moss and loose materials.

Do not apply if rain is forecasted or surface is damp.

Use PPE — gloves, goggles and suitable respirator when spraying in confined spaces.

Pack Size 20L

Finish High gloss wet look (non-yellowing)

Coverage (guide) ~6–8 m² / litre (porosity dependent) — 20L ≈ 120–160 m² (two coats recommended)

Buy Now — Professional 20L Wet Look Sealer

Note: Coverage will vary with surface porosity and application method. Always test a small area before full application. Store indoors between 5–25°C.