Premium Ultrasonic PCB cleaning - fluid flux and lapping paste remover.
1 Lt
From £24.99
Skip to product information
Carbusonic
Premium Ultrasonic PCB cleaning - fluid flux and lapping paste remover.
£24.99
Tax included. Shipping calculated at checkout.
8 people are viewing this right now
Availability :
Shipping & Returns
Free shipping and returns available on all orders. We ship all UK orders within 1–2 business days.
Ultrasonic PCB Cleaning Fluid – Flux Removal Solution for Circuit Boards & Electronics
This professional ultrasonic cleaning fluid is formulated for the effective removal of flux residues, contaminants and processing residues from printed circuit boards (PCBs) and electronic assemblies. Designed for use in ultrasonic cleaning baths, it provides controlled, residue-free cleaning when used correctly.
Primary Applications
Flux residue removal after soldering
Cleaning PCBs and electronic assemblies
Maintenance and rework preparation
Electronics repair, laboratory and workshop use
Compatibility
Suitable for printed circuit boards (PCBs)
Compatible with SMD, BGA and fine-pitch components
Safe for solder mask, silkscreen and most connector plastics
Always test on an inconspicuous area or sample board before full production use.
Ultrasonic Cleaning Instructions (Recommended Process)
Dilute the cleaning fluid with deionised water up to 1:8 depending on contamination level.
Fill ultrasonic bath and pre-heat to 30°C – 50°C.
Submerge PCB assemblies ensuring full coverage.
Run ultrasonic cycle for 3–10 minutes depending on residue severity.
Remove boards immediately after the cycle completes.
IMPORTANT – Post Cleaning Rinse & Drying (Critical Step)
Immediately after ultrasonic cleaning:
Rinse thoroughly with isopropyl alcohol (IPA) to displace water and dissolved residues.
Dry using clean, oil-free compressed air.
This step is essential to prevent mineralisation, residue formation and corrosion on electrical connections.
Failure to perform IPA rinsing and proper drying may result in mineral deposits or long-term reliability issues.
Expected Results
Removal of flux and processing residues
Clean solder joints and component surfaces
No visible residue when correctly rinsed and dried
“Why choose the 5 L Premium Size?”
Cost-effective for workshops and labs
Suitable for frequent or batch cleaning
Reduced downtime from refilling
Ideal for production, rework and service centres
What This Product Does NOT Do
Does not repair damaged or corroded components
Does not replace conformal coating where required
Not intended for manual immersion cleaning without ultrasonic agitation
Safety & Handling
Wear suitable gloves and eye protection
Use in a well-ventilated area
Dispose of used solution responsibly according to local regulations
Keep out of reach of children
Product Information
Formulation: Concentrated ultrasonic cleaning fluid
Dilution: Up to 1:8 with deionised water
Operating Temperature: 30°C – 50°C
Application: Ultrasonic bath use
Condition: New
Ideal For
Electronics repair technicians
PCB assembly and rework
Laboratories and workshops
Professional and industrial environments
ultrasonic pcb cleaning fluid, flux removal solution, circuit board cleaner, ultrasonic electronics cleaner, pcb flux remover, electronic assembly cleaning
Related Products
You may also like
