{"product_id":"marine-bilge-paint-for-boat-barge-narrowboat-locker-oil-fuel-resistant-5l","title":"Marine Bilge Paint For Boat Barge Narrowboat Locker Oil Fuel Resistant 5L","description":"\u003cdiv\u003eCARBUSONIC CHEMICAL COATINGS DIVISION\u003c\/div\u003e\n\u003cdiv\u003eENDURATHANE™\u003c\/div\u003e\n\u003cdiv\u003eMarine Barge Paint | High Gloss Enamel | Trade Grade\u003c\/div\u003e\n\u003cdiv\u003eMarine Boat \u0026amp; Narrowboat Paint\u003c\/div\u003e\n\u003cdiv\u003eHigh Gloss Marine Enamel | Above \u0026amp; Below Waterline\u003c\/div\u003e\n\u003cdiv\u003eEndurathane™ is a single-pack, white spirit based marine enamel designed for boats, narrowboats, canal barges and cruisers. This marine bilge paint provides a durable high gloss finish with UV resistance, weather resistance and strong colour retention in canal, inland and coastal environments.\u003c\/div\u003e\n\u003cdiv\u003eSuitable as narrowboat paint, barge paint and boat locker paint, Endurathane™ is ideal for hulls, cabin sides, decks and marine structures where a professional finish and long-term protection are required. It also performs well where an oil resistant paint is needed in marine environments exposed to daily use, moisture and contamination.\u003c\/div\u003e\n\u003cdiv\u003eSuitable for primed metal, primed fibreglass (GRP) and wood surfaces, this marine enamel paint is designed for canal, inland and coastal use above and below the waterline.\u003c\/div\u003e\n\u003cdiv\u003eWhy Endurathane™ Marine?\u003c\/div\u003e\n\u003cdiv\u003eBuilt for marine use where appearance and durability both matter. This coating is designed to give a clean gloss finish, strong adhesion on prepared substrates and reliable protection for canal boats, barges and yachts.\u003c\/div\u003e\n\u003cdiv\u003eTechnical Overview\u003c\/div\u003e\n\u003cdiv\u003eProduct Type Single-pack marine enamel\u003c\/div\u003e\n\u003cdiv\u003eFinish High gloss boat finish\u003c\/div\u003e\n\u003cdiv\u003eCoverage Approx. 8 m² per litre\u003c\/div\u003e\n\u003cdiv\u003eTouch Dry 2–4 hours\u003c\/div\u003e\n\u003cdiv\u003eRecoat 12–24 hours\u003c\/div\u003e\n\u003cdiv\u003eFully Cured 7 days\u003c\/div\u003e\n\u003cdiv\u003eApplication Brush, solvent-resistant roller or spray\u003c\/div\u003e\n\u003cdiv\u003eSubstrates Primed metal, primed GRP, wood\u003c\/div\u003e\n\u003cdiv\u003eThinner White Spirit if required\u003c\/div\u003e\n\u003cdiv\u003eAvailable Colours\u003c\/div\u003e\n\u003cdiv\u003eBlack, Dark Grey, Battleship Grey, Red, Blue and Yellow.\u003c\/div\u003e\n\u003cdiv\u003eSuitable For\u003c\/div\u003e\n\u003cdiv\u003e• Narrowboats and canal boats • Yachts and barges\u003c\/div\u003e\n\u003cdiv\u003e• Boat hull paint above \u0026amp; below waterline • Boat locker paint\u003c\/div\u003e\n\u003cdiv\u003e• Marine deck paint • Primed fibreglass (GRP)\u003c\/div\u003e\n\u003cdiv\u003e• Primed metal boat structures • Wooden boat components\u003c\/div\u003e\n\u003cdiv\u003e• Inland, canal and coastal use • Marine bilge paint applications\u003c\/div\u003e\n\u003cdiv\u003ePerformance \u0026amp; Protection\u003c\/div\u003e\n\u003cdiv\u003eEndurathane™ delivers a durable high gloss marine finish with reliable UV resistance and weather resistance. It is designed to help protect painted marine surfaces from day-to-day exposure in canal, inland and coastal environments.\u003c\/div\u003e\n\u003cdiv\u003eWhen used below the waterline, the coating may soften if submerged for prolonged periods. As with all marine coatings, correct substrate preparation and priming are essential for best results.\u003c\/div\u003e\n\u003cdiv\u003eSurface Preparation \u0026amp; Priming\u003c\/div\u003e\n\u003cdiv\u003eFor best performance ensure surfaces are clean, dry, degreased and lightly abraded. Remove rust, loose paint and contaminants before coating. Bare metal and fibreglass should always be primed with a suitable marine primer. When applying over existing coatings, ensure the surface is sound and keyed for adhesion.\u003c\/div\u003e\n\u003cdiv\u003ePainted surfaces may become slippery when wet. A textured non-slip marine paint version is available if required.\u003c\/div\u003e\n\u003cdiv\u003eMixing Instructions\u003c\/div\u003e\n\u003cdiv\u003eThis coating is heavily pigmented and must be thoroughly stirred before use. Separation and colour float may occur during storage, so proper mixing is essential to achieve the correct colour, gloss level and performance.\u003c\/div\u003e\n\u003cdiv\u003eUse a slow-running drill fitted with a paddle mixer (recommended)\u003c\/div\u003e\n\u003cdiv\u003eFor smaller cans, use a palette knife that reaches the bottom of the tin\u003c\/div\u003e\n\u003cdiv\u003eMix continuously for 3–5 minutes until fully lifted from the base of the can\u003c\/div\u003e\n\u003cdiv\u003eDo not rely on short sticks, screwdrivers or whisks\u003c\/div\u003e\n\u003cdiv\u003eIf thinning is required, add thinners only after the paint has been fully mixed\u003c\/div\u003e\n\u003cdiv\u003eThinning Instructions\u003c\/div\u003e\n\u003cdiv\u003eThinning is optional and depends on application method and conditions. Use TA Paints T0001 White Spirit where thinning is required. For spray application, begin at approximately 5% and increase gradually as needed. Do not exceed 10–15% thinning, as excessive thinning will reduce coverage, film build and durability.\u003c\/div\u003e\n\u003cdiv\u003eAlways test a small area before full application.\u003c\/div\u003e\n\u003cdiv\u003eFAQs\u003c\/div\u003e\n\u003cdiv\u003eQ1. Can this be used above and below the waterline?\u003c\/div\u003e\n\u003cdiv\u003eYes, it is suitable for above and below waterline use, provided the surface is correctly prepared and primed. As with most coatings, prolonged submersion may reduce performance over time.\u003c\/div\u003e\n\u003cdiv\u003eQ2. What surfaces can I apply it to?\u003c\/div\u003e\n\u003cdiv\u003eIt is suitable for primed metal, primed fibreglass (GRP) and wood surfaces, making it ideal for hulls, cabin sides, decks and marine structures.\u003c\/div\u003e\n\u003cdiv\u003eQ3. How long before the boat can go back in the water?\u003c\/div\u003e\n\u003cdiv\u003eThe coating should be fully cured before immersion. Allow a minimum of 7 days before placing the substrate into water.\u003c\/div\u003e\n\u003cdiv\u003eENDURATHANE™ – Marine Coatings by Carbusonic\u003c\/div\u003e\n\u003cdiv\u003eFor technical advice, bulk orders or trade enquiries, please contact us via eBay messaging.\u003c\/div\u003e\n\u003cdiv\u003eManufactured for marine and commercial use. Always follow application and safety guidelines.\u003c\/div\u003e","brand":"Carbusonic","offers":[{"title":"Default Title","offer_id":54920760131917,"sku":"168310778966","price":59.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/6924\/0397\/files\/s-l1600_8264c26b-ca29-4e96-8fa4-ab1069b44535.webp?v=1790760788","url":"https:\/\/carbusonic.co.uk\/products\/marine-bilge-paint-for-boat-barge-narrowboat-locker-oil-fuel-resistant-5l","provider":"Carbusonic","version":"1.0","type":"link"}